User Manual

Before Using the Unit 15
■ Rear and left views
CAUTION
Do not block the ventilation openings. Doing so could cause the
unit to overheat, creating a risk of fire.
■ Symbols Used in This Guide
Ventilation
openings
Power connector
Connects to the AC
adapter provided with
this unit.
SCSI connector
Connects to a 50-pin
half-pitch (pin type)
SCSI cable.
DIP switches
These set the SCSI ID.
Stand
Pull this out to
prevent the unit from
toppling.
Power switch
Turns the scanner’s
power on and off.
This symbol shows the setting
method (central position, front/back,
and paper feed direction) for the
document to be scanned.
This symbol shows that the pages
of the document set in the scanner
are fed sheet by sheet (page
separation mode).
These symbols show the method
for arranging documents with
multiple pages.
Shows that the pages of the
document set in the scanner are all
fed at once without separation
(bypass mode).
USB connector
Connects to a Hi-
Speed USB 2.0-
compatible cable.