User manual

Back Previous Page Next Page
Contents
8
WARNING
Note the following precautions whenever using the scanner. Failure to do so
may result in a fire or electric shock.
• Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly
flammable substance near the scanner.
• Do not cut, damage, or modify the power cord. Do not place heavy objects on
the power cord, and do not pull or excessively bend the power cord.
• Never connect the power cord when your hands are wet.
• Do not connect the scanner to a multi plug power strip.
• Do not knot or coil the power cord as this may result in a fire or electric shock.
When connecting the power cord, make sure that the power plug is securely
and completely inserted into the power outlet.
• Do not use a power cord or AC adapter other than the ones provided with this
scanner.
• Do not take the scanner apart or modify it.
• Never try to take the AC adapter apart or modify it in any way, as this is
dangerous.
• When cleaning the scanner, turn the power switch OFF and disconnect the
power cord from the power supply.
• Clean the scanner using a slightly dampened cloth which has been well wrung
out. Never use alcohol, benzene, paint thinner, or any other flammable
substances.
• If the scanner makes strange noises, or gives off smoke, heat, or strange odors,
or the scanner does not function or other abnormalities occur when you use the
machine, immediately turn the power switch OFF, and disconnect the power
plug from the power outlet. Then, contact your local authorized Canon dealer or
service representative for further information.
• Do not drop the scanner, or subject it to impact or strong shock. Should the
scanner ever become damaged, immediately turn the power switch OFF, and
disconnect the power plug from the power outlet. Then, contact your local
authorized Canon dealer or service representative to have the unit serviced.
• Before moving the scanner, be sure to turn the power switch OFF, and
disconnect the power plug from the power outlet
CAUTION
• Do not install the scanner on a surface that is unstable or tilted, or in an area
subject to excessive vibrations, as this may cause the scanner to fall,
resulting in personal injury or damage to the scanner.
• Never place small metal objects such as staples, paper clips, or jewelry on the
scanner. These items may fall into the scanner, and cause a fire or electric
shock. Should such objects ever fall inside the scanner, immediately turn the
power switch OFF, and disconnect the power plug from the power outlet. Then,
contact your local authorized Canon dealer or service representative to have the
unit serviced.
• Do not install the scanner in a humid or dusty location. Doing so might cause a
fire or electric shock.
• Do not place objects on top of the scanner. Such objects may tip or fall over,
resulting in personal injury.
• Connect only to a power outlet of the rated voltage and power supply frequency
(120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region).
• When unplugging the power cord, grasp it firmly by its plug. Do not pull directly
on the power cord, as this may damage or expose the cord's internal wiring,
resulting in a fire or electric shock.
• Leave sufficient space around the power plug so that it can be unplugged easily.
If objects are placed around the power plug, you will be unable to unplug it in an
emergency.
• Do not allow water or flammable substances (alcohol, paint thinner, benzene,
etc.) to spill into the scanner, as this may result in a fire or electric shock.
• Turn OFF the power switch for safety when not using the scanner for a long
period of time, such as overnight. Also, turn OFF the power switch, and
disconnect the power cord from the power outlet for safety when the machine
will not be used for an extended period of time, such as during consecutive
holidays.
• Do not wear loose clothing or jewelry that may get caught in the scanner while
you are using it. This may result in personal injury. Be extra careful of neckties
and long hair. If anything becomes caught in the scanner, immediately
disconnect the power cord to stop the scanner.
• Be careful when loading paper into the scanner and when removing jammed
paper. It is possible to cut your hand on the edge of a sheet of paper.
Handling