PUB.
Important Usage Instructions Introduction WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: DISCONNECT THE MAINS PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE.
The Advantages of DVDs RECORDING With a DVD you just press the recording start/ stop button and the camcorder will find the empty space on the disc ( 22). Don’t waste time fast forwarding and rewinding a tape to find from where to start a new recording. Never worry about mistakenly recording over a precious memory! PLAYING Just select a scene from the index screen! Just insert your finalized* disc into a DVD player and immediately find the scene you want to play back from the index ( 26).
An Introduction to DVDs You have probably heard of DVD discs and they come in various types and in two sizes the more common 12 cm DVDs and 8 cm Mini DVDs. This camcorder uses commercially available 8 cm DVD-R or DVD-RW discs. So... what disc to choose? DVD-R DVD-RW Can be recorded only once. You can record on it many times. You cannot edit or delete the recordings. You can delete scenes or initialize the disc and start recording again. Now that I have the disc...
Differences in Available Features Depending on the Disc The camcorder’s features and functions available will differ depending on the type of disc you use and the disc specification selected when initializing it.
Table of contents Introduction The Advantages of DVDs ................................................................................3 An Introduction to DVDs ..................................................................................4 Differences in Available Features Depending on the Disc...............................5 About this Manual............................................................................................8 Checking the Supplied Accessories ...................................
Manually Adjusting the Focus........................................................................42 Changing the Autofocus Mode ......................................................................43 Using the Self Timer ......................................................................................44 Setting the White Balance .............................................................................45 Applying Image Enhancing Effects ...........................................................
About this Manual Thank you for purchasing the Canon DC100/DC95. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder 65). fail to operate correctly, refer to the Troubleshooting table ( Conventions Used in the Manual : Precautions related to the camcorder operation. : Additional topics that complement the basic operating procedures. : Reference page number.
Selecting MENU options 1. Press MENU . 2. Select ( ) the desired menu from the left side column and press ( ). E The title of the selected menu appears on top of the screen and under it the list of settings. 3. Select ( ) the setting you want to change and press ( ). • The orange selection bar indicates the menu setting currently selected. Items not available appear in black. • To return to the menu selection screen, select ( ) [RETURN] and press ( ). ) to save the setting. Introduction 4.
To change the operating mode In addition to turning the camcorder on and off, the power switch also toggles the camcorder’s operating mode. From the ON position, slide down the power switch momentarily towards MODE and release it.
Components Guide Left side view Right side view Introduction Front view FUNC. button ( 35) MENU button ( 31) Lens cover switch ( 22, 24) ( - open, - closed) EXP (Exposure) switch ( 41) / DISPLAY button ( 30) (Multi Selector) button (Multi Selector) ( 8) FOCUS button ( 42) (Multi Selector) WIDE SCR (Widescreen) button ( 23) / PLAYLIST button ( 52) Buttons and switches other than ( example, MENU ).
Top view Bottom view Back view Mode switch ( 37) Zoom lever ( 25) Speaker ( 27) Tripod socket ( 23) OPEN (disc cover) switch ( 20) Strap mount Viewfinder ( 17) Dioptric adjustment lever ( 17) Operating mode indicator ( 9) Red / (CAMERA), Red (CAMERA), Green (PLAY) Power switch ( 9) Buttons and switches other than ( example, MENU ). 12 LCD screen ( 17) (record review) button ( 23) / (fast reverse) button ( 26) / Index screen – button ( 26) (fast forward) button ( 26) / Index screen + button ( 26) D.
Screen Displays Recording Movies Recording reminder The camcorder counts from 1 to 10 seconds when you start recording. This is helpful to avoid scenes that are too short. Remaining recording time When there is no more available disc space, “ END” will be displayed and the recording will stop.
Number of still images available flashing in red: No disc in green: 6 or more images in yellow: 1 to 5 images in red: No more images can be recorded • When viewing the still images, the display will always be in green. • Depending on the recording conditions, the number of still images available displayed may not decrease even after a recording has been made, or may decrease by 2 still images at once.
Getting Started Preparations Step 1: Preparing the Power Supply The camcorder can be powered with a battery pack or directly using the compact power adapter. Charge the battery pack before use. 1. Turn off the camcorder. 2. Attach the battery pack to the camcorder. E CHG. (charge) indicator DC IN terminal • Open the LCD panel. • Slide in the connector end of the battery in the direction of the arrow and press it gently until it clicks. BATTERY RELEASE switch Preparations 3.
Recording Mode Viewfinder XP LCD [NORMAL] LCD [BRIGHT] Viewfinder SP LCD [NORMAL] LCD [BRIGHT] Viewfinder LP LCD [NORMAL] LCD [BRIGHT] Max. Recording Time 80 min. 80 min. 75 min. 95 min. 90 min. 90 min. 105 min. 100 min. 95 min. Typical Recording Time* 45 min. 45 min. 40 min. 50 min. 50 min. 45 min. 50 min. 50 min. 50 min. Playback Time 85 min. 95 min. 105 min. * Approximate times for recording with repeated operations such as start/stop, zooming, power on/off.
Step 2: Preparing the Camcorder 1. Turn on the camcorder. 2. Adjust the viewfinder. E Keep the LCD panel closed to use the viewfinder and adjust the dioptric adjustment lever as necessary. 3. Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger, and the start/ stop button with your thumb. Step 3: Adjusting the LCD Screen MENU button Preparations 180 90 Subject can monitor the LCD screen Rotating the LCD Panel Open the LCD panel 90 degrees.
Step 4: Changing the Display Language MENU ( DISPLAY SETUP 31) LANGUAGE ENGLISH Options [DEUTSCH] [ENGLISH] [ESPAÑOL] [FRANÇAIS] [ITALIANO] [POLSKI] 1. 2. 3. 4. 5. [ [ [ [ [ [ ] ] ] ] ] ] Press MENU . Select ( ) [DISPLAY SETUP] and press ( ). Select ( ) [LANGUAGE ] and press ( ). Select ( , ) the desired option and press ( Press MENU to close the menu. If you changed the language by mistake, follow the to change the setting. ).
Time Zones Once you have set the time zone, date and time, you do not need to reset the clock every time you travel to another time zone. Select the time zone referring to the date and time displayed on the screen. E Time Zones and Difference from GMT/UTC London GMT/UTC Wellington (WELLINGTN) +12 Paris +1 Samoa -11 Cairo +2 Honolulu -10 Moscow +3 Anchorage -9 Dubai +4 Los Angeles (L.A.
Step 7: Loading and Removing a Disc Use only 8 cm mini DVD discs marked with the DVD-R or DVD-RW logo. Before inserting the disc be sure to check that the recording surface is clean. If necessary, use a soft lens-cleaning cloth to remove any fingerprints, dirt buildup or smudges from the disc surface. Inserting the Disc To change the operating mode, refer to About the Operating Modes ( 9). 1. Move the power switch to ON to set the camcorder in mode. 2.
A confirmation message will appear on the screen. Select ( ) [YES] and press ( ) to start the disc initialization. • The disc initialization will take approximately one minute. Avoid moving the camcorder while the operation is in progress. • You can start recording movies once the record pause indication appears. E The disc initialization screen may not appear automatically if you operated the camcorder’s buttons while the disc recognition was in progress.
Recording Basic Functions Recording Movies Before You Begin Recording Make a test recording first to check if the camcorder operates correctly. Since recordings made on a DVD-R cannot be deleted, we recommend you use a DVD-RW disc to make the test recordings. To change the operating mode, refer to About the Operating Modes ( 9). 1. Open the LCD panel and the lens cover (move the lens cover switch down to ). 2. Press Start/Stop to begin recording. • Press Start/Stop again to pause recording.
power switch towards MODE and release it, or move the power switch to and back to ON. About the LCD and viewfinder screen: The screens are produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction.
Recording Still Images To use the still images functions, you will need to set [STILL IMAGES] to [ON] beforehand ( 9). * only. To change the operating mode, refer to About the Operating Modes ( 9). 1. Open the LCD panel and the lens cover (move the lens cover switch down to ). 2. Press Start/Stop halfway. Once the focus is automatically adjusted, will turn green and one or more AF frames appear. 3. Press Start/Stop fully. The DISC access indicator will flash as the image is being recorded.
Zooming E only. To change the operating mode, refer to About the Operating Modes ( : In addition to the 25x optical zoom, the 1000x ( ) /770x ( digital zoom is also available ( 31). * Zoom out 9). ) Zoom in 25x Optical Zoom Move the zoom lever toward W to zoom out (wideangle). Move it toward T to zoom in (telephoto). Keep at least 1 m to the subject. At wide-angle, you can focus on a subject as close as 1 cm. When set to [VARIABLE], the zoom speed will be faster in the record pause mode.
Playback Playing Back Movies To change the operating mode, refer to About the Operating Modes ( 9). The scene index screen appears with the selection frame on the first scene. 1. Move ( , ) the selection frame to the scene you want to play back. Press + or – to move to the next or previous index page. 2. Press / to begin the playback. • Playback of the scenes recorded on the disc will start from the scene selected.
Slow Forward Playback / Slow Reverse Playback During playback pause, press or . Repeatedly press the button to increase the playback speed. Slow playback: 1/16 → 1/8 → 1/4 → 1/2 the normal speed. E Skipping Scenes During normal playback, push the multi selector ( ) to skip to the beginning of the next scene. Push the multi selector ( ) to return to the beginning of the current scene. Repeat to skip to the beginning of the previous scene. Except for fast playback at 1.
Viewing Still Images To use the still images functions, you will need to set [STILL IMAGES] to [ON] beforehand ( 9). : You can view still images already recorded on a disc (with another camcorder). However, playback cannot be guaranteed for all still images. To change the operating mode, refer to About the Operating Modes ( Use the multi selector ( between images. 9). ) to move Multi selector Some still images may not be displayed correctly.
Image Jump Function You can also quickly locate a specific image without having to browse all of them one by one. Push the multi selector ( E ) and keep it pressed down. Image numbers will quickly run in sequence. When you release the multi selector the image corresponding to the number selected will be displayed. Magnifying the Image During playback, still images can be magnified up to 5 times. To change the operating mode, refer to About the Operating Modes ( 9). Zoom lever 1.
Selecting the Recording Data Display The camcorder keeps a data code containing the recording date and time and other camera data such as shutter speed and exposure (f-stop). To change the operating mode, refer to About the Operating Modes ( : [DATE], [TIME], [DATE&TIME] only. 9). Data Code display You can select the data code display style on the screen. MENU ( 31) DISPLAY SETUP DATA CODE DATE & TIME Options [ [ [ [ [ DATE] TIME] DATE & TIME] CAMERA DATA] CAM.
Options Lists – MENU / FUNC. Advanced Functions Menu items not available appear in black on the screen. For details about how to select 8). an item, refer to Selecting an Option - MENU/FUNC. ( only available with the E . MENU Options Camera Setup (Digital Zoom, Image Stabilizer, etc.) CAMERA SETUP A.SL SHUTTER. [ ON], [ OFF] The camcorder automatically uses slow shutter speeds to obtain brighter recordings in places with insufficient lighting.
FOCUS PRI. [ ON], [ OFF] The camcorder records the still image only after the focus has been adjusted. Set it to [ OFF] if you wish to record a still image as soon as you press OFF], no focusing frame appears. Focus priority cannot be turned off when the mode switch is set to . In the [ FIREWORKS] recording program ( ) the setting is automatically set to [ OFF]. Start/Stop .
PLAYLST ALL DEL ( 53) [NO], [YES] This option is available only in the playlist index screen. DISC PROTECT ( E 55) [NO], [YES] PHOTOMOVIE ( 58) [NO], [YES] DISC TITLE ( 56) Display Setup (LCD Brightness, Language, etc.) DISPLAY SETUP BRIGHTNESS Adjusts the brightness of the LCD screen. Use the multi selector ( ) to adjust the brightness to your preference. Changing the brightness of the LCD screen does not affect that of the viewfinder or the recordings.
DEMO MODE [ ON], [ OFF] The demonstration mode displays the camcorder’s main features. It starts automatically when the camcorder is powered with the power adapter if you leave it turned on without loading a disc for more than 5 minutes. To cancel the demo mode once it started, press any button, turn off the camcorder or load a disc. System Setup (Volume, Beep, etc.
TV TYPE [ NORMAL TV], [ WIDE TV] In order to display the picture in full and in the correct aspect ratio, select the setting according to the type of television to which you will connect the camcorder. E [NORMAL TV]: TV sets with 4:3 aspect ratio. [WIDE TV]: TV sets with 16:9 aspect ratio. Date/Time Setup DATE/TIME SETUP T.ZONE/DST ( 18) DATE/TIME ( 19) DATE FORMAT [Y.M.D (2006.1.1 AM 12:00)], [M.D,Y (JAN. 1, 2006 12:00 AM)], [D.M.Y (1.JAN.2006 12:00 AM)] FUNC.
( [ 48) D.EFFECT OFF], [ BLK&WHT] Recording mode [ HIGH QUALITY], [ STANDARD PLAY], [ LONG PLAY] Approximate recording times with a brand new DVD-R disc are as follows: XP: 20 minutes, SP: 30 minutes, LP: 60 minutes. Recording in LP mode gives you a longer recording time; however, depending on the condition of the disc (long usage, imperfections, etc.) the picture and sound recorded in LP mode may be distorted. We recommend using the XP or SP mode for important recordings.
Using the Recording Programs Recording Programs E * only. To change the operating mode, refer to About the Operating Modes ( 9). Auto The camcorder adjusts focus, exposure and other settings automatically, allowing you to just point and shoot. Program AE ( 38) Shutter-Priority AE ( 39) Aperture-Priority AE ( 40) Portrait The camcorder uses a large aperture, achieving a focus on the subject while blurring other distracting details. Night Use this mode to record in poorly lit places.
Selecting the Recording Program only. To change the operating mode, refer to About the Operating Modes ( * 9). Move the mode switch between the recording categories. Automatic mode Select [ PROGRAM AE], [ SHUTTER-PRIO. AE], [ APERTURE-PRIO. AE] Select [ PORTRAIT], [ SPORTS], [ NIGHT], [ SNOW], [ BEACH], [ SUNSET], [ SPOTLIGHT], [ FIREWORKS] To select a recording program after choosing FUNC. Recording Program icon FUNC.
If the optimal exposure cannot be obtained, try the following actions. Manually adjust the exposure ( 41). Change the metering method ( 41). E Using the Shutter-Priority AE Mode You can select a shutter speed, and the camcorder automatically sets the aperture setting most appropriate for the subject. Select a high shutter speed for recording fast moving subjects, and a slow shutter speed to add a motion blur to moving objects, enhancing the feel of movement of the image. * only.
Using the Aperture-Priority AE Mode You can select an aperture value, and the camcorder automatically sets the shutter speed most appropriate for the subject. Use low aperture values (large aperture) to blur the background for a portrait, or high aperture values (small aperture) to achieve a broad depth of field for recording landscapes. * only. To change the operating mode, refer to About the Operating Modes ( 9). Mode switch: Aperture value guideline [1.8], [2.0], [2.4], [2.8], [3.4], [4.0], [4.
Manually Adjusting the Exposure More Recording Options Adjust the exposure when a subject is underexposed (for example, when backlit subjects appear too dark in the image) or overexposed (for example, when recording subjects under very strong light and they appear too bright or glaring in the image). only. To change the operating mode, refer to About the Operating Modes ( * Mode switch: (except for the [ 1. Press EXP ( ). E 9). FIREWORKS] recording program).
Manually Adjusting the Focus Autofocus may not work well on the following subjects. In such case, focus manually. Reflective surfaces * Subjects with low contrast or without vertical lines Fast Moving Subjects Through dirty or wet windows Night Scenes only. To change the operating mode, refer to About the Operating Modes ( 9). Mode switch: 1. Adjust the zoom. 2. Press FOCUS ( ). “MF” appears. 3. Adjust ( ) the focus as required until the image appears focused.
Changing the Autofocus Mode You can change the AF (autofocus) frame selection mode. E only. To change the operating mode, refer to About the Operating Modes ( * 9). Options 9 Point AiAF Mode switch: * Center point Mode switch: * * Except for the [ Select ( Depending on the shooting conditions, one or more AF frames out of the nine frames available are automatically selected and focused on.
Using the Self Timer only. To change the operating mode, refer to About the Operating Modes ( * 9). : Set the camcorder in record pause mode. CAMERA SETUP MENU SELF TIMER ON MENU “ ” appears. : Press Start/Stop . The camcorder starts recording after a 10-second countdown. The countdown appears on the screen. : Press Start/Stop , first halfway to activate the autofocus and then fully to record the still image. The camcorder will record the still image after a 10-second countdown.
Setting the White Balance You can choose one of the preset settings to reproduce colors more accurately, or set a custom white balance to obtain the setting best suited to your specific recording conditions. only. To change the operating mode, refer to About the Operating Modes ( * E 9). Mode switch: ( 35) AUTO Options [ [ [ [ [ [ [ Settings are automatically set by the camcorder. Use this setting for outdoor scenes. DAYLIGHT] For recording outdoors on a bright day.
Custom white balance may provide better results in the following cases: - Changing lighting conditions - Close-ups - Subjects in a single color (sky, sea or forest) - Under mercury lamps and certain types of fluorescent lights 46
Applying Image Enhancing Effects You can record with different color saturation and contrast effects. E only. To change the operating mode, refer to About the Operating Modes ( * 9). Mode switch: ( IMAGE EFFECT OFF 35) Options [ [ [ [ [ IMAGE EFFECT OFF] VIVID] NEUTRAL] LOW SHARPENING] SOFT SKIN DETAIL] [ CUSTOM] FUNC. Image Effect icon FUNC. Desired option* * To set the custom image effect when you select [ Advanced Functions More Recording Options Records with no image enhancing effects.
Using the Digital Effects [ FADER] Faders Begin or end scenes with a fade to or from black. You can preview the effect on the display. [FADE-T] (fade trigger) [JUMP] [ZIGZAG] [ [WIPE] [CORNER] (corner wipe) [PUZZLE] [TIDE] [FLIP] [BEAM] EFFECT] Effects Add flavor to your recordings. Sound will be recorded normally. You can preview the effect on the display. [BLK&WHT] (black and white) [MOSAIC] [WAVE] [ [SEPIA] [ART] [BALL] [COLOR M.
Setting FUNC. Digital Effects icon FADER E / EFFECT Press ( ) Desired fader/effect. FUNC. ** Press ( )* * You can preview the effect on the screen before pressing ( ** The selected effect icon appears. ). Applying 1. Press D.EFFECTS to activate the fader/effect. • To fade in, press D.EFFECTS before you start recording, then press Start/Stop to start recording. • To fade out, press D.EFFECTS while recording, then press Start/Stop to pause the recording. 2. Press D.
Setting FUNC. Digital Effects icon MULTI-S Press ( FUNC. “ ) ( ) S.SPEED ,( ) Desired transition speed ( ) S.SPLIT ,( ) Desired number of images Press ( ) ” appears. Applying 1. Press D.EFFECTS to capture the images. 2. Press Start/Stop to record the multi-image screen displayed.
Selecting the Size and Quality of Still Images Still images are recorded on the disc using the JPEG (Joint Photographic Experts Group) compression. As a general rule select a larger image size for higher quality. only. To change the operating mode, refer to About the Operating Modes ( * ( 35) L E 9).
Editing the Scenes (DVD-RW in VR mode only) Editing Functions Creating a Playlist Create a playlist to easily edit your movies (for example, change the order in which the scenes you recorded will be played back or edit scenes including only the best parts and cutting out the rest) without affecting your original recordings. After you add scenes to the playlist you will have two types of index screens: The original index screen (for the original recordings) and the playlist index screen.
Deleting Scenes You can delete those scenes that you are not interested in keeping. Remember that when you delete scenes in the playlist, you do not affect your original recordings; However, when you delete an original recording, it will be deleted also from the playlist. E Be careful when deleting original recordings. Once deleted, an original scene cannot be recovered. Do not change the operating mode while the scene is being deleted. Scenes cannot be deleted when the disc is protected ( 55).
DISC OPERATIONS MENU MOVIES ALL DEL * YES MENU * When you are deleting the playlist, this menu option will be replaced by [PLAYLST ALL DEL]. Dividing a Scene You can divide your recordings in order to leave only the best parts and later cut out the rest. Remember that when you divide scenes in the playlist, you do not affect your original recordings. Photomovie scenes and scenes created by converting single still images ( cannot be divided.
Disc Options Protecting the Disc You can protect the whole disc to prevent the accidental erasure of important recordings. Initializing the disc ( protected. 55) will permanently erase all recordings, even if the disc is To change the operating mode, refer to About the Operating Modes ( Disc type: E 9). DVD-RW initialized in VR mode.
Changing the Disc Title Before you finalize your disc, you can give it a title. The disc title will be displayed on the index screen when playing the finalized disc in most DVD players. To change the operating mode, refer to About the Operating Modes ( MENU 9). DISC OPERATIONS DISC TITLE Enter the title (up to 20 characters).* SET MENU YES * Select one character at a time and press ( press ( ) to delete the last character. 56 ) to add it to the title.
Erasing Still Images Still Image Options Be careful when erasing images. Erased images cannot be recovered. E Still images on a protected disc cannot be erased. Erasing a Single Image To change the operating mode, refer to About the Operating Modes ( Disc type: 9). DVD-RW initialized in VR mode. IMAGE ERASE FUNC. ERASE FUNC. Erasing a Single Image Just After Recording You can erase the still image you recorded last, while you are reviewing the image immediately after recording it. only.
Converting Still Images into Photomovie Scenes Still images are recorded using JPEG compression, but a DVD player only recognizes the MPEG standard. Thus, to play back your still images with your DVD player, first you need to create a Photomovie scene – a slide show of all still images on the disc, where each image will be displayed for approx. 3 seconds. only. To change the operating mode, refer to About the Operating Modes ( * 9).
Preparing your Disc for Playing on a DVD Player – [FINALIZE] Disc Finalization To play the disc you recorded on a DVD player, a computer’s DVD drive or other digital device, you need to finalize it first. You do not need to finalize the disc to play back your recordings with the camcorder connected to the TV. E To view your still images on a DVD player you will need to convert them to Photomovie scenes beforehand ( 58). Be sure to finalize the disc in normal room temperatures.
Finalizing the Disc The length of the finalization process depends on the scenes recorded and the remaining free space on the disc. DISC OPERATIONS MENU FINALIZE MENU * YES * During the disc finalization a progress bar is displayed. Close the menu only after the screen display returns to the [DISC OPERATIONS] menu. When using a finalized disc, the finalization mark type display.
Recording Additional Movies on a Finalized Disc – [UNFINALIZE] You can record additional movies after the finalization by unfinalizing an already finalized DVD-RW disc in VIDEO mode. Disc type: E DVD-RW initialized in VIDEO mode. Be sure to unfinalize the disc in normal room temperatures. If the procedure was not completed correctly due to high temperature, let the camcorder cool off before resuming operation. Place the camcorder on a table or other stable surface before starting the procedure.
Playing Back on a TV Screen External Connections Connecting to a TV and VCR Selecting the Type of TV To change the operating mode, refer to About the Operating Modes ( 9). Before connecting the camcorder, select the [TV TYPE] setting according to the TV set to which you will connect the camcorder - [WIDE TV]: TV sets with 16:9 aspect ratio or [NORMAL TV]: TV sets with 4:3 aspect ratio ( 35).
Connection Diagram: TVs with SCART terminal E Signal flow STV-250N Stereo Video Cable (Supplied) PC-A10 SCART Adapter Open the terminal cover 1. Turn off all devices before starting the connections. 2. Connect the STV-250N Stereo Video Cable to the camcorder’s AV terminal and the terminals on the TV or VCR. • TVs without SCART adapter: Connect the white plug to the white audio terminal L (left), the red plug to the red audio terminal R (right) and the yellow plug to the yellow VIDEO terminal.
Recording to a VCR You can copy your recordings by connecting the camcorder to a VCR or a digital video device. For a connection diagram showing how to connect the camcorder to a VCR see 62). the previous section Playing Back on a TV Screen ( To change the operating mode, refer to About the Operating Modes ( 9). 1. Connected device: Load a blank cassette and set the device to record pause mode. 2. This camcorder: Locate the scene you wish to copy and pause playback shortly before the scene. 3.
Troubleshooting Trouble? If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. E Power Source Problem Solution • Camcorder will not turn on. • The camcorder switches off by itself. • The disc compartment cover will not open. • LCD/viewfinder switches on and off. Battery pack is exhausted. Replace or charge the battery pack. Battery pack will not charge. Charge the battery pack in temperatures between 0 40 C.
Problem Solution • The disc’s rotation can be faintly heard. • Occasionally the operation sound can be heard. The disc is activated from time to time. This is not a malfunction. – After using the camcorder for a long time the lights up in red. This is not a malfunction. Turn the camcorder off and let it cool for a while before resuming operation. – Recording Problem 66 Solution Image will not appear on the screen. Set the camcorder to .
Playback/Editing Problem Pressing the playback button does not start playback. Solution Check that the disc contains recorded scenes. – Load a disc. 20 Set the camcorder to . You may not be able to play with this camcorder discs recorded or edited with other DVD recorders or computer DVD drives. – If using a single-sided disc, check that the disc is inserted with the label side facing up. 20 The camcorder has exceeded its operational temperature.
Playing Back the Disc in an External DVD Device External DVD device refers to DVD players, DVD recorders, computer’s DVD drives and other digital devices. Problem Solution There is a brief stop between scenes. Depending on the DVD player, there might be a very short stop between scenes during playback. – Disc is running, but image will not appear on the TV screen. TV/VIDEO selector on the TV is not set to VIDEO. Set the selector to VIDEO. 62 You attempted to play back or dub an incompatible disc.
Message CANNOT DIVIDE THE SCENE Explanation Photomovie scenes cannot be divided. 58 You may not be able to divide very short scenes. – Scenes cannot be divided when the disc already contains 999 scenes. – You may not be able to further divide scenes shorter than 5 seconds that were created by dividing a previous scene. – DISC IS FINALIZED CANNOT RECORD You cannot record additional scenes on a finalized DVD-R disc.
Handling Precautions Do’s & Don’ts Camcorder Do not subject the camcorder to vibrations or strong impacts while the DISC access indicator is on or flashing. The data may not be correctly recorded on the disc, and the recording may be permanently lost. Do not touch the pick up lens. Do not carry the camcorder by the LCD panel or the disc cover. Be careful when closing the LCD panel.
Although the battery pack’s operating temperature range is from 0 °C to 40 °C, the optimal range is from 10 °C to 30 °C. At cold temperatures, performance will temporarily decline. Warm it in your pocket before use. Replace the battery pack if the usable time after full charge diminishes substantially at normal temperatures. E About the battery terminal cover The battery terminal cover has a [ ]-shaped hole. This is useful when you wish to differentiate between charged and uncharged battery packs.
Maintenance/Others Storage If you do not intend to use the camcorder for a long time, store it in a place free of dust, in low humidity, and at temperatures not higher than 30 °C. Cleaning Camcorder Body Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloth or volatile solvents such as paint thinner. Pick Up Lens Remove any dust or dirt particles using a non-aerosol type blower brush. Never touch the pick up lens directly to clean it.
Condensation may form in the following cases: When the camcorder is moved from an air-conditioned room to a warm, humid place When the camcorder is moved from a cold place to a warm room When the camcorder is left in a humid room When a cold room is heated rapidly E How to avoid condensation: Do not expose the camcorder to sudden or extreme changes in temperature.
System Diagram Additional Information (Availability differs from area to area) WS-20 Wrist Strap CG-300E Battery Charger Shoulder Strap BP-208 Battery Pack CA-570 Compact Power Adapter Mini DVD Disc DVD-R/RW BP-208 Battery Pack PC-A10 SCART Adapter STV-250N Stereo Video Cable TV VCR DVD player/ recorder Mini DVD Disc DVD-R/RW Computer SC-2000 Soft Carrying Case 74
Optional Accessories Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.
Specifications DC100/DC95 E System Disc Recording System Television System Image Sensor Compatible Media Maximum Recording Time (1.4 GB single-sided 8 cm Mini DVD) LCD Screen Viewfinder Microphone Lens Lens Configuration AF system Minimum Focusing Distance White Balance Minimum Illumination Recommended Illumination Image Stabilization Video: DVD-VIDEO (VIDEO mode) DVD-VR (VR mode) only with 8 cm DVD-RW Video Compression: MPEG2 Audio Compression: Dolby Digital 2ch Still Images: Exif 2.
CA-570 Compact Power Adapter Power supply Power consumption Rated output Operating temperature Dimensions Weight 100 – 240 V AC, 50/60 Hz 17 W 8.4 V DC, 1.5 A 0 – 40 °C 52 x 90 x 29 mm 135 g BP-208 Battery Pack Battery type Rated voltage Operating temperature Battery capacity Dimensions Weight Rechargeable Lithium Ion Battery 7.4 V DC 0 – 40 °C 850 mAh 39 x 8 x 63 mm 40 g Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice.
Index * 16:9 screen ratio . . . . . . . . . . . . . . . . . 23 9 Point AiAF* . . . . . . . . . . . . . . . . . . . . 43 A Abroad, using the camcorder . . . . . . . . Auto (recording program) . . . . . . . . . . . Auto slow shutter . . . . . . . . . . . . . . . . . Av (recording program) . . . . . . . . . . . . AV OUT terminal . . . . . . . . . . . . . . . . . 73 37 31 40 62 B Battery pack, charging . . . . . . . . . . . . . Battery pack, remaining charge . . . . . . Beach (SCN) . . . . . . . . . . . .
Recording - Movies . . . . . . . . . . . . . . . Recording - Still images* . . . . . . . . . . . Recording data . . . . . . . . . . . . . . . . . . . Recording mode . . . . . . . . . . . . . . . . . . Recording programs . . . . . . . . . . . . . . . Recording reminder . . . . . . . . . . . . . . . RESET . . . . . . . . . . . . . . . . . . . . . . . . . Review - Movies . . . . . . . . . . . . . . . . . . 22 24 30 36 37 13 65 23 S Scene Editing . . . . . . . . . . . . . . . . . . . .
