Troubleshooting guide

D1250U2F Quick Start Guide

Using the Scanner Buttons

You can use the three convenient buttons on the front of the scanner to scan and perform related

tasks easily with a single touch of the button. Place an item on the scanner before pressing a button.

• To use these buttons, ScanGear CS-U, ScanGear Toolbox and ArcSoft PhotoBase should

be installed from the CanoScan Setup Utility CD-ROM.

To open the scanned image in the

PhotoBase window

1. Press the [SCAN] button.

2. The scanner will scan the item.

3. The scanned image will appear in the

PhotoBase window.

To print (copy) the scanned image with a

printer

1. Press the [COPY] button.

2. The scanner will scan the item.

3. The scanned image will print.

• The printer driver should be installed and the

printer should be on-line to use this function.

To e-mail the scanned image as an

attached file

1. Press the [E-MAIL] button.

2. The scanner will scan the item.

3. The [E-mail software selection] dialog

will appear. Select an option from the

list and click [OK].

• This step is required only for the first scan.

4. The e-mail software will start, and

the scanned image will be attached in

a new message window.

5. Enter the receiver’s address and title,

write a message, confirm the required

settings, and send the message.

• MAPI compliant e-mail software, such as

Outlook Express, Microsoft Outlook,

Eudora or Netscape Messenger should be

installed and enabled. With certain e-mail

software, you should set the MAPI

function on.

SCAN Button

COPY Button

E-MAIL Button

• While scanning, you can change the default settings for scanning by clicking the

[Cancel] button. For details on changing settings or arranging the scanner’s button-to-

function assignment, refer to the ScanGear Toolbox User’s Guide (electronic manual).

*D1250U2F_QSG_E 11/24/01, 7:19 AM14