ImageBrowser_v3_guide

5 ImageBrowser Software User Guide
Chapter 1
Try It! ImageBrowser
Starting ImageBrowser (2/4)
1.
Connect the camera to the computer using a USB
cable.
Read the guides that accompanied your camera for instructions
to connect the camera to the computer. Some models cannot
connect with the computer unless you set it to a particular
mode, such as the Replay mode. As described in the guides for
these models, set the camera to the correct mode to transfer
data.
A dialog similar to the following one will appear the first time
you start ImageBrowser.
This dialog allows you to select the next action for
ImageBrowser to automatically perform after it is started.
If the above dialog does not appear when ImageBrowser is first
started, see the Troubleshooting section in the Appendices.
2.
For this example, leave the [Display Images] option
selected and click the [OK] button.
REFERENCE
• For explanations of the Download Images and Launch
RemoteCapture options, see The ImageBrowser Automation
Wizard Feature at Startup section in the Appendices.
A dialog similar to the following one will appear. (This dialog
will only appear the first time the program is started.)
3.
Click [Set].
The Camera window will open and display the
camera’s images.
The model name
of the camera that
you are using
appears here.