Technical data

3-23 Queues window

Print area

The job icons in the Print area are described below:

The Print area, also referred to as the Printed queue, contains jobs that have already

been printed. These jobs were assigned the Print destination (white printer icon in the

Spool or RIP areas) without any Hold instructions; therefore, they all have white icons

and rows.

NOTE: A job row that appears in light red indicates that an error occurred while

printing the job. To see the error, double-click anywhere in the row.

Newly printed jobs are added to the Printed queue, and are shown at the top of the list.

Jobs are saved in the Printed queue until the job limit is reached. When the ﬁrst job

over the limit is printed, the oldest job is deleted from the disk. The default job limit is

10 jobs. The value for Jobs Saved in Printed Queue can be changed in Setup by the

administrator.

NOTE: If you reprint a job in the Printed queue, the job returns to its original position

in the Printed queue after it is printed.

While it is printing, a job consists of PostScript and raster data. The raster data in

RAM is not cleared until memory is needed to rasterize the next job. As long as the

raster data is intact, the job can be reprinted from the Printed queue. Printed jobs that

still have their raster data are represented by a white raster icon in the Printed queue

(icon 2 in the previous table); jobs with only PostScript data remaining are represented

Print area icon: What it indicates: How long you see the job:

White printer icon

White job row

PostScript data only—raster

data has been deleted

Until the job limit is reached

White raster icon

White job row

Raster and PostScript data

If RAM is needed to RIP an

active job, the raster data is

deleted and the job gets the

PS icon (icon 1, above)

Until the job is reprinted or

the job limit is reached