Technical data

3
3-18 Introduction to the Command WorkStation
NOTE: In the Spool status bar, the filename and user information always appear as
“Unknown” (as shown below). This information is not available until the job has
finished spooling to the ColorPASS disk.
When a job is being processed, provided animation is enabled (see page 4-5), the
corresponding status bar is animated, indicating that the process is active.
If an error occurs, the Print status bar alerts you by displaying a message on a red
background instead of the normal blue background.
Enlarging the status bars Click the small arrows at the left of the status bar to
expand the status bar display. Click the arrows again to collapse the status bar to its
original size. To expand all the status bars at the same time, press Ctrl-E. Click the
arrows or press Ctrl-E again to collapse them to their original size.
Changing proportions By default, the status bars divide the window area into three
equal parts. You can drag the RIP and Print status bars up or down to change the
proportion of the window devoted to each job area. For example, drag the RIP status
bar down if you have a long list of spooled jobs that you want to see without scrolling.
Spooled jobs on Hold (yellow)
Active spooled jobs (white)
RIPped jobs on Hold (yellow)
Active RIPped jobs (white)
Printed jobs (white); some include
raster data stored in RAM