Technical data

3
3-5 Starting up and logging in
Connecting to the server
If the Command WorkStation was previously connected to a server, you are prompted
to choose a ColorPASS from the list of servers.
NOTE: If the Command WorkStation has never been connected to a ColorPASS, you
are prompted to configure an entry for the server. Click OK and see Getting Started for
instructions on how to configure a new connection.
With the ColorPASS device name (5000) selected, click OK. If the device name is not
displayed, click the plus sign (+) to expand the ColorPASS entry.
The Command WorkStation connects to the server and you are prompted to choose a
login level and enter a password to log in (see the next section). If you have any
difficulties connecting to the server, see Appendix C for error messages and
troubleshooting information.