Technical data

2
2-7 Starting and shutting down the ColorPASS
Shutting down the ColorPASS
You may need to shut down the ColorPASS for service. When you do so, fonts that
have been downloaded to the hard disk drive are not deleted. Print jobs in the Hold
and Printed queues and jobs that have been processed but not printed are not deleted
and are available for printing when you restart the ColorPASS.
TO SHUT DOWN THE COLORPASS:
1. Make sure that the ColorPASS is not receiving, processing, or printing a job.
Make sure that the RIPping and Printing areas on the FieryBar both read Idle. If a job
has just finished processing or printing, wait at least five seconds after the RIPping and
Printing areas switch to Idle before proceeding to step 2.
NOTE: If a job from the Print queue is processing, it will continue processing and print
after the ColorPASS is restarted; if a job to the Direct connection is processing, it will
not finish processing or printing.
2. Click the Windows Start button, and choose Shut Down.
3. Select “Shut down the computer?” and click Yes.
A message appears, informing you that it is safe to shut down the computer.
4. Power off the system by pushing the power switch on the back of the ColorPASS.