Technical data

2-5 Starting and shutting down the ColorPASS

Starting and shutting down the ColorPASS

Generally, you can leave the ColorPASS running all the time. This section describes

how to shut down and restart the ColorPASS when necessary.

TO START THE COLORPASS:

• Push the power switch on the back of the ColorPASS (see page 1-7). If the copier is

also powered off, power it on before powering on the ColorPASS.

When the FieryBar displays Idle, you can enter ColorPASS Setup by right-clicking the

FieryBar and choosing Set Up Fiery from the menu that appears.

In the Fiery Setup dialog box, there are three tabs:

For information about the Setup options, see the Conﬁguration Guide.

Click: To do this:

General Setup

Conﬁgure the General Setup options.

Network Setup

Conﬁgure the Network Setup options.

Printer Setup

Conﬁgure the Printer Setup options.