Technical data

2
2-3 Introduction to the FieryBar
Commands
Right-clicking the FieryBar or the Fiery icon on the right side of the Windows taskbar
enables you to access many ColorPASS features. You can choose the following
commands from the menu that appears:
Command WorkStation
Launches the Command WorkStation. For more
information on connecting to and using the features of
the Command WorkStation, see Chapters 3 and 4.
ColorWise Pro Tools
Launches ColorWise Pro Tools. For more information
on connecting to and using the features of ColorWise
Pro Tools, see the Color Guide.
Set Up Fiery
Opens the ColorPASS Setup dialog box. For more
information about the Setup options, see the
Configuration Guide.
Restart Fiery
Shuts down all ColorPASS activity in the correct
manner before restarting. You should use this option
instead of the power switch on the back of the
ColorPASS (see “Starting and shutting down the
ColorPASS” on page 2-5).
Clear Server
Clears all jobs in all server queues as well as all jobs
archived on the ColorPASS hard disk, the index of
archived jobs (in the Archive window), all FreeForm
masters, the index of FreeForm masters (in the
FreeForm window), and the Job Log. Check with your
administrator before choosing Clear Server. After
choosing this option from the FieryBar, a warning
message appears; click OK to clear the server and
restart the ColorPASS.
Cancel RIP
Cancels the job currently processing on the
ColorPASS.
Cancel Print
Cancels the job currently printing on the ColorPASS.