Technical data

1-8 Using the Control Panel

If you press a button, the following options appear. For information about the Setup

menus and options, see the Conﬁguration Guide.

Restarting the ColorPASS

You should use the procedure described below to restart the ColorPASS rather than

using the power switch on the back of the ColorPASS.

TO RESTART THE COLORPASS:

1. Make sure that the ColorPASS is not receiving, processing, or printing a job.

Make sure that the status message on the Control Panel is Idle.

NOTE: If a job from the Print queue is processing, it will continue processing and print

after the ColorPASS is restarted; if a job sent to the Direct connection is processing, it

will not ﬁnish processing or printing.

2. Press the Menu button to display the Functions menu.

3. Use the down button to scroll to the last screen and choose Shut Down.

4. Use the line selection button to choose Restart Server.

Choose: To do this:

Exit Setup

Exit the Setup menus; the ColorPASS reboots.

Server Setup

Enter the Server Setup menus.

Network Setup

Enter the Network Setup menus.

Printer Setup

Enter the Printer Setup menus.

PS Setup

Enter the PostScript Setup menu.

Color Setup

Enter the Color Setup menu.

Job Log Setup

Enter the Job Log Setup menu.

Change Password

Change the Administrator password.