Technical data

1
1-6 Using the Control Panel
Resume Printing
Resume communication between the copier and the ColorPASS after you have
finished making copies or printing other jobs.
Shut Down
Shut down all ColorPASS activity in the correct manner and then restart. You
should use this option instead of the power switch on the back of the ColorPASS.
The following options are available from the submenu that appears:
Restart Server—Restarts the server without shutting down the ColorPASS hard
disk.
Shut Down System—Shuts down the ColorPASS hard disk.
Reboot System—Restarts the system after shutting down the ColorPASS hard
disk.
Clear Server
Clear all jobs in all server queues as well as all jobs archived on the ColorPASS hard
disk, the index of archived jobs (in the Archive window), all FreeForm masters, the
index of FreeForm masters (in the FreeForm window), and the Job Log. Check with
your administrator or operator before choosing Clear Server. If an Administrator
password has been set, you must enter it to access Clear Server.
Run Setup
Enter the Setup menu and change Setup option settings. See the Configuration
Guide for more details.
Run Diagnostics
This function is provided for service representatives only. Contact your authorized
service/support technician for information about running diagnostics.
Calibration
Calibrate the ColorPASS using AutoCal. For more information, see the Color Guide.
If an Administrator password has been set, you must enter it to access Calibration.