Technical data

1
1-5 Introduction to the ColorPASS Control Panel
Functions menu
The Functions menu provides many of the options available from the Command
WorkStation. You can choose the following commands from this menu:
Print Pages
Print special pages from the ColorPASS. You can print the following pages from
the submenu that appears:
Test Page—A Test Page enables you to confirm that the ColorPASS is properly
connected to the copier, and provides color and grayscale samples to troubleshoot
problems with the copier or the ColorPASS. The following settings are among
those listed on the Test Page: Server Name, Printer Model, color settings,
calibration information, date and time the Test Page was printed.
Configuration—Prints the Configuration page, which gives the current server and
device configuration. This page lists general information about the hardware and
software configuration of the ColorPASS, the current options for all Setup
settings, information about the current calibration, and the Ethernet and Token
Ring addresses of the ColorPASS.
Job Log—Prints a log of the last 55 jobs. For information on the fields in the Job
Log and on printing it in other forms, see “Job Log window” on page 3-35.
Control Panel Map—Prints the Control Panel Map, which is an overview of the
screens you can access from the Control Panel. For information about using these
screens to set up the ColorPASS, see the Configuration Guide.
Color Charts—Prints samples of the RGB, CMY, and PANTONE colors available
from the ColorPASS.
Font List—Prints a list of all fonts currently on the ColorPASS hard disk.
Suspend Printing
Suspend communication between the ColorPASS and the copier. You must
suspend printing if you want to interrupt the current ColorPASS job so that you
can use the copier to make copies or print another job first. Jobs continue to
process on the ColorPASS. The activity light is turned off when this command is
executed. After you make the copies, select Resume Printing to continue printing
jobs from the ColorPASS.