Technical data

1
1-2 Using the Control Panel
Activity light
The activity light indicates the current ColorPASS activity. If the light is:
Buttons
Solid red An error has occurred causing the ColorPASS to be disabled.
Flashing red There is an error causing printing to be disabled, but the
ColorPASS is capable of processing.
Solid green The ColorPASS is idle.
Flashing green The ColorPASS is processing or printing a job, or
communicating with a remote computer.
No light The ColorPASS is off or starting up.
Line selection
buttons
There are four line selection buttons on the right side of the
Control Panel. Use these buttons to select the command
displayed on the corresponding line of the display window.
When a button is active, a special character (>) appears in the
display window next to the button.
Up and down
buttons
Use these buttons to scroll to different screens in multi-
screen lists, to select Setup options from a list of available
options, and to scroll alphanumeric characters.
Menu button Press this button to view other screens. Under normal
operation, the Control Panel displays the Info, RIP, or Print
Status screen with information about the status of the
ColorPASS. If you press the Menu button, the Functions
menu is displayed and you can perform additional operations
(see page 1-5). If a job is processing or printing, press the
Menu button to cycle among the active screens.
Power button Press the button to turn on and off the ColorPASS.
Reset button Use this button to restart the ColorPASS after you have
selected Shut Down System from the Shut Down menu.