Technical data

C
C-5 Troubleshooting
Load ___ spec-1 in __
The copier is not loaded with the special paper size specified. The
ColorPASS will print when the copier is loaded with the required
paper in the specified drawer.
Load ___ spec-2 in __
The copier is not loaded with the special paper size specified. The
ColorPASS will print when the copier is loaded with the required
paper in the specified drawer.
Load ___ trans in __
The copier is not loaded with the transparency size specified. The
ColorPASS will print when the copier is loaded with the required
paper in the specified drawer.
No Finisher
A printed option selected requires the copier finisher, but there is
no finisher attached to the copier.
No fuser oil
The copier does not have any fuser oil. Printing will resume when
you add fuser oil.
No key
This message is displayed if your model requires that you use a key.
No key cntr
This message is displayed if the card required to use the key is
missing.
No Paper Deck
A printed option selected requires the Paper Deck-K21 or Paper
Deck-J1, but there is no paper deck attached to the finisher.
No printer
The copier is unavailable. See the copier console for instructions.
No Reverse unit
A print option selected requires the reverse unit, but there is no
reverse unti attached to the finisher.
No sorter
The copier’s sorter is unavailable. See the copier console for
instructions.
No stapler
The copier’s stapler is unavailable. See the copier console for
instructions.
No toner
The toner for one of the colors has run out. Refer to the copier
display to determine which toner color is empty. If more than one
toner needs to be added, press and hold the Stop icon on the
copier for additional information.
Page limitation over
for Booklet
Pages of a Booklet job exceed the maximum capacity.
ColorPASS message: Corrective action/additional information: