Technical data

5
5-9 Using templates
DocBuilder Pro supplies built-in templates that define settings for commonly-used
layouts, such as 2-up saddle, 3-up trifold brochure, 4-up gatefold, and so on. You can
also create your own templates. For a complete listing of built-in templates, see
Appendix B. For information on creating your own templates, see “Imposition
settings” on page 6-1.
Both built-in templates and your own templates appear in the Template pop-up menu,
which always contains at least one item, the Default Settings template. DocBuilder Pro
applies this template when no other template is saved with a job; for example, the
default template is always applied the first time a job is opened in the main window.
Template pop-up menu
You can apply a template by choosing its name from the Template pop-up menu, in
the top-left corner of the main window. The new settings take effect immediately.
TO SAVE THE CURRENT SETTINGS AS A TEMPLATE:
You can save the current combination of Sheet, Layout, Scaling, and Finishing settings
as a template.
NOTE: The Size setting of the Sheet menu cannot be saved.
1. Click the save template icon to the right of the Template pop-up menu.
2. In the dialog box that appears, type a name for the template and click OK or press
Enter.
For more information on creating templates, see “Managing templates” on page 6-14.
Delete templat
e
Save template
Name of current template