Technical data

xiii About this manual
This manual is intended for ColorPASS-Z5000 Color Server
™
operators or
administrators, or users with the necessary access privileges, who monitor and manage
job flow, perform color calibration, and troubleshoot problems that may arise. It
describes the functions and features of Fiery
®
utilities and Fiery WebTools
™
for the
purposes of print job management and color quality control.
The ColorPASS includes Command WorkStation
™
software, which enables an
operator to manage all jobs sent to the ColorPASS. Although it may not be the case at
all sites, the documentation for this product assumes the presence of an operator who
controls and manages jobs sent by users from remote workstations.
Client utilities can be installed onto the ColorPASS from the User Software CD if the
Advanced Controller Interface option is installed. Do not install any other applications
onto the ColorPASS. Other applications are not supported and can cause system
problems.
N
OTE
:
The term “ColorPASS” is used in this manual to refer to the ColorPASS-Z5000
Color Server. The ColorPASS supports the CLC5000 color copier.
About this manual
This manual is organized as follows:
• Chapter 1 describes the ColorPASS Control Panel. It explains the various messages
and icons that you might see on the Control Panel and describes how to print system
information pages from the Control Panel. It also explains how to start up and shut
down the ColorPASS.
• Chapter 2 describes the FieryBar. It explains the various messages and icons that you
might see and also explains how to start up and shut down the ColorPASS if you
have the Advanced Controller Interface installed.
Preface