Technical data

5
5-1 Main window
Imposition is a special feature of DocBuilder Pro. This chapter describes the graphical
user interface for imposition functions. For background information on imposition
and its uses, see Appendix A.
Main window
From the Imposition main window, you can impose the pages of a document in an
order and positioning suitable for printing and binding. If you are connected to more
than one ColorPASS at once, you can access the Imposition feature from one
ColorPASS only.
NOTE: The Imposition main window is referred to as the “main window” from now on.
TO OPEN A JOB IN THE MAIN WINDOW:
• Send the job you want impose to the Hold queue or move it to the Spool area using
the Command WorkStation.
For more information on sending jobs to the ColorPASS, see the Printing Guide. For
information on using the Command WorkStation, see Chapter 3.
• Before imposing a job, make sure to have the Adobe Type Manager installed on your
computer.
After installation, copy the Type_1 folder and the Truetype folder from the Adobe
Type Manager CD to the Psfonts folder installed on your Windows computer, and
then specify the PSfonts folder in the Font Locations window of Adobe Acrobat
Distiller. Choose Font Locations from the Settings Menu and select the folder.
• It is recommended that the following print options be set to the following settings
before imposing any job:
• Page Order set to Reverse
• Rotate 180 set to No
• Select any held job in the Spool area and choose Impose from the Job menu. Or you
can right-click the job and choose Impose from the right-mouse menu.
Chapter 5:
Using
Imposition