Printing Guide

A
A-9 Print Options
Paper Source
A
utoSelect/Drawer 1/Drawer 2/Paper
Deck-K1/ Paper Deck-J1/ SB (Stack
Bypass)/ SB-Size Set at Copier
Specify the paper tray to use for your job. The AutoSelect setting automatically
selects the drawer containing the paper
size specified for the job.
The
Paper Deck-J1 option cannot be set
until it is installed.
For information on configuring the Paper
Deck-J1 as an installable option, see
Getting Started.
See page A-19 for more information.
Paper Source Alignment
Disable
/Enable
Select Enable to align the paper source
drawers of the copier for accurate duplex
printing
If you select Enable, the Paper Source
option cannot be set to
AutoSelect or
SB-Size Set at Copier, or the Media Type
option cannot be set to
Custom Paper
Size.
See the Job Management Guide for more
information.
PowerForm
On/Off
Select On when printing PowerPoint files
to the ColorPASS.
Setting the PowerForm option to On can
reduce the processing time for
PowerPoint print jobs.
To enable this option, the following
options must be applied:
Compression to
Off
Combined Separations to Off
Use Master to None
Create Master to None
This option is available from the
Windows NT 4.0 printer driver only.
Pure Black Text/Graphics
Printer’
s default/Off/On
Select Off to print black text and graphics
as a four color black using C, M, Y, and K
toner, and to use normal PostScript
rendering.
Select
On to print black text and graphics
as a one color black, using 100% black
toner only.
The
Printer’s default setting reflects the
setting specified in ColorPASS Setup.
For Windows 95/98 and Windows NT
4.0, choose
Expert Color as the Print
Mode to access this option.
The Combined Separations option must
be set to
Off. This option is automatically
set to
On if the Black Overprint option is
set to
On.
For more information, see the Color
Guide.
Option and settings:
(Default setting is underlined)
Description:
Requirements, constraints,
and information: