Printing Guide

A
A-8 Print Options
Page Order
Forward/Re
verse
Select Forward to print the pages of your
job from first to last.
Select
Reverse to print the pages of your
job from last to first.
N
OTE: If you set Page Order to Reverse
and print a job with more than 1000
pages, or a job that is too large to be saved
to the ColorPASS’s memory and disk
(based on currently available space), then
the job may print in sections that have to
be manually rearranged after printing.
For example, if you print a 1500-page
document in reverse order, the
ColorPASS might divide the job into two
portions, first printing page 1000 to page
1, and then page 1500 to page 1001.
If this option is set to
Reverse,
Compression must be set to
On.
Page Range
All
/Even/Odd
Specify which pages of the document to
print. To print a contiguous page range,
specify the first and last page numbers of
the range separated by a hyphen. To print
non-contiguous pages, specify the page
numbers using commas as separators.
This option is available only as an
override from Fiery WebSpooler, Fiery
Spooler, and Command WorkStation.
See page A-19 for more information.
Paper Size
Letter
/A4/Legal/11x17/A3/Letter-R/
A4-R/12x18/305x440/A5/A5-R/
Statement/Statement-R/
Custom page 1/Custom page 2/
Custom page 3
Specify the size of the paper on which to
print the document.
If you select 12x18, 305x440, or A5,
Media Type must be set to Plain Paper
and Paper Source must be set to
SB (Stack
Bypass) or SB-Size Set at Copier.
If the Paper Size is set to
12x18, 305x440,
A5, Statement, Statement-R, or Custom
Paper Size the following options cannot
be set:
Sorter Mode to
Sort or Group
Duplex to Top-Top or Top-Bottom
If you select Statement-R, the Paper
Source option cannot be set to
Paper
Deck-J1or Paper Deck-K1.
Option and settings:
(Default setting is underlined)
Description:
Requirements, constraints,
and information: