Printing Guide

A
A-5 Print Options
Copier Mode
Photo/Character/Auto2/A
uto1
Specific Copier Modes produce optimum
results with certain files. Choose the
Copier Mode best suited for your job:
Photo works best if the file is a
photograph.
Character works best with text or data
with thin lines.
Select
Auto1 if the file is a combination of
text, graphics, and images.
Auto1 will
print text at 400dpi and graphics and
images at 200 or 266dpi.
Select
Auto2 if the file is a combination of
text, graphics, and images.
Auto2 will
print text and graphics at 400dpi and
images at 200 or 266dpi.
Copies
1
-999 (Windows 95/98/Me and
Mac OS),
1
-9999 (Windows NT 4.0 and
Windows 2000)
Specify the number of copies of the job to
print.
Do not enter a value greater than the
maximum specified in the printer driver
you are using.
Create Master
None/1-15
To create a FreeForm master from this
job, specify a number to assign to the
FreeForm master file.
See page 4-1 for more information.
This option is selectable only if FreeForm
is available.
Duplex
Off
/Top-Top/Top-Bottom/Manual
Specify whether the job should print
single-sided or double-sided (duplex), by
specifying the orientation of printed
images. Choose
Manual to print from
stack bypass.
For more information on duplex
printing, see page A-16.
If this option is set to
Manual, Sorter
Mode cannot be set to
Sort or Group. If
this option is set to
Manual, Media Type
cannot be set to
Transparency, or Auto
Select.
Finishing
Bypass
/Shift stack/Booklet with
Staple/Booklet with Staple &
Trim/Booklet/Booklet with Trim
Specify how you want to finish your job. The Finisher option must be installed to
use all settings other than Bypass.
Option and settings:
(Default setting is underlined)
Description:
Requirements, constraints,
and information: