Printing Guide

1-25 Printing from applications

NOTE: If paper loaded in the selected drawer is a different size, orientation, and/or

media type than that of the job you are sending, the ColorPASS displays an error

message and the job will not print. You should then load the correct paper in the

selected drawer or cancel the job. One exception is that when the Paper Source option

is set to SB-Size Set at Copier, no error message is displayed. Be sure to load the

appropriate paper in the SB (Stack Bypass) tray and select the correct paper size from

the copier’s touch panel display. Scroll down to Printer Features, and select the

appropriate settings for the print job.

These print options are speciﬁc to the ColorPASS and the copier. They override

settings in ColorPASS Printer Setup, but can be changed from Command

WorkStation, Fiery WebSpooler, or Fiery Spooler. For information about these options

and overrides, see Appendix A.

If you choose Printer’s default, the job prints according to the settings entered during

Setup, or default settings.

NOTE: As you select print options, incompatible print settings appear with a caution

icon next to their names. If you specify incompatible print settings, the Incompatible

Print Settings dialog box appears. Follow the on-screen instructions to resolve the

conﬂict.

Illustration to be provided.