Printing Guide

A
A-11 Print Options
Rotate 180
Yes/No
Specify if you want to rotate the pages of
your job 180 degrees.
This option is only available from
Mac OS and Windows NT 4.0. For
Windows 95/98/Me, use the
Orientation option.
The Rotate 180 option can also be
specified from Fiery WebSpooler, Fiery
Spooler, or Command WorkStation.
Depending on the application you are
using, your landscape job may print with
the incorrect orientation; if this occurs, or
if you select a Stapler Mode (other than
Off) and the staple is inserted in the
wrong place, select
Yes.
Save Fast Reprint
Off
/On
Specify whether or not to save a job’s
raster data to disk after printing, so the
data will be available later for reprinting
(without reRIPping).
With Save Fast Reprint set to
On, all print
option settings remain with the saved
raster data each time the job is reprinted.
To print the job with new print option
settings, you must remove raster and
reRIP the job.
Sharpness
Softer/Normal
/Sharper/None
Change the Sharpness setting to alter the
results of a print. Select
Sharper to make
edges appear more defined; select
Softer
to make edges less defined.
Slip Sheet
On/Off
Specify whether to insert a slip sheet
between copies of multiple-copy jobs.
If this option is set to On, the following
settings must be applied:
Sort Mode set to
Off or Collate
Stapler Mode set to Off
Media Type to Plain Paper, Transparency,
or Special Paper
If this option is set to On, the following
options cannot be applied:
Duplex to
Manual
Paper Size to 12x18, A5, 305x440,
Statement, or Custom Paper Size
Paper Source to SB (Stack Bypass) or
SB-Size Set at Copier
Manual Face set to Second Side
Option and settings:
(Default setting is underlined)
Description:
Requirements, constraints,
and information: