Owner's Manual

Page 9
Downloading multiple jobs
If you immediately cancel downloading multiple jobs from the Command WorkStation
running on a remote computer, the first job may not be canceled. However, the remaining
jobs will be canceled.
Downloading jobs from removable media
When you launch Fiery Downloader from the Command WorkStation and download files
from a removable media device or CD-ROM, the Modified column may not correctly
display the date and time. Additionally, the date may be displayed in the format
MM/DD/YY.
Clearing the ColorPASS
If you clear the ColorPASS hard disk by choosing Clear from the Server menu on the
Command WorkStation, wait until the ColorPASS returns to Idle before you log in to the
Command WorkStation again.
Managing fonts
If you download fonts not resident on the ColorPASS from the Command WorkStation
running locally (doing so requires the Advanced Controller Interface option), be sure to do
so using Fiery Downloader. Do not use the Manage Fonts Command from the Server
menu.
Remove White PPT Background
The Remove White PPT Background print option is available only from the Command
WorkStation Properties window. To use this option on a Mac OS computer, set the printer
driver option Color Matching to any other setting than PostScript Color Matching.
CMYK Simulation Profile
If you set CMYK Simulation Profile to SWOP-Coated (EFI), DIC (EFI), or Euroscale
(EFI) from the Windows 95/98 printer driver with Two-way communication enabled, and
then try to override the setting from the Properties window, the pull-down menu becomes
blank, preventing you from selecting a setting. As a workaround, right-click the box again,
choose SWOP-Coated, DIC, or Euroscale, and override the setting. This also applies to
profiles downloaded using ColorWise Pro Tools Profile Manager for use as simulation or
output profile print options.
Size Column in the Job Log window
When you print an imposed job or a print job using Fiery Downloader, “0” may be
displayed in the Size column of the Job Log window.
Setup from the Command WorkStation
After you make any changes to the settings in remote Setup, save the changes so they will
take effect, and reboot the ColorPASS. When you access the Server setup options to see if
the changes have taken effect, the “Unable to open communication to the specified server”
message appears. When you verify the connection, a protocol message may appear;
however, the message will disappear in several minutes.
Additionally, if you change the Print to PS Error option from Yes to No, the option remains
set to Yes in the Paper Setup screen of the Command WorkStation running remotely.