Owner's Manual

Page 3

LPR printing via NDPS Gateway

If you print in an NDPS environment on Windows 2000, the ﬁlename and user name of

the job may not be displayed correctly in the Queues or Job Log window in the Command

WorkStation, Fiery WebSpooler, and Fiery Spooler.

Cancel RIP Command

If you print a multiple-page job by selecting “Print and Hold” or “RIP and Hold” from the

Command WorkStation Job menu and then select Cancel RIP from the FieryBar menu, an

incomplete raster ﬁle will be created and displayed in the RIP area of the Command

WorkStation Queues window.

Jobs printed to the Direct connection

If you print a job to the Direct connection, the job may be displayed as “Unknown” in the

Printing area. However, the job is printed normally.

Activity light

If an error occurs, the activity light on the FieryBar may behave differently from the

ColorPASS activity light.

Disk Full message

The “Disk Full” message may not be displayed in the FieryBar when the ColorPASS disk is

almost full.

Windows Print Sharing (SMB)

If you set up a Domain or Workgroup in the Windows Printing Service in Local Setup, it is

strongly recommended that you set up the service in Local Setup only. Once you have set

up the service in Local Setup, do not attempt to change the settings either from the

ColorPASS Control Panel or Remote Setup. Do so in Local Setup.

If you conﬁgure RARP in Local Setup, the subnet mask and/or gateway address speciﬁed in

Remote Setup or on the Control Panel may have no effect. As a workaround, enter

“0.0.0.0” for the subnet mask and gateway address in Local Setup.

Page layout and illustration applications

When printing from page layout applications, such as Adobe PageMaker, or illustration

applications, such as Adobe Illustrator, you may see white gaps between the text in the

foreground and the image in the background. To remove the gaps, choose None for the

Sharpness print option.

ColorPASS hard disk space

If you print a job that exceeds the amount of available space on the ColorPASS hard disk,

the ColorPASS Control Panel Display window alternately reads “Idle” and “Disk Full,” and

the activity light ﬂashes red.

Using the < character for Instructions

If you enter

as the ﬁrst character in the Instructions ﬁelds, the Note may not be printed in

the Job Log.

FieryBar

Printing