Owner's Manual

Page 2

Windows NT 4.0 Server Tools

Conﬁguring and monitoring the Windows NT 4.0 functions from the ColorPASS, or

remotely controlling the ColorPASS using Windows NT 4.0 Server Tools require the

Advanced Controller Interface option. For more information, contact your authorized

service/support technician.

Local Setup

You can access Setup locally at the ColorPASS in these ways:

• Right-click the FieryBar menu and choose Set Up Fiery.

• In the Command WorkStation, choose Setup from the Server menu.

Date format in Local Setup

The date in Server Setup may be displayed in the format DD/MM/YY.

Changing Protocol Settings from Local Setup

If you change TCP/IP Settings by switching to DHCP from Static in the IP conﬁguration

pop-up menu in the Network Setup tab of the Fiery Server Setup, and if you change back

to Static from DHCP afterwards, make sure to do so from the local Fiery Server Setup.

Maximum frame size for Token Ring

When you specify the maximum frame size for Token Ring in Local Setup, enter the value

that corresponds to one of the following settings:

• 4202 (default)

• 2154

• 1130

• 632

These are the same settings available in Remote Setup.

Additionally, the maximum frame size speciﬁed in Local Setup or Remote Setup, or at the

ColorPASS Control Panel may vary from the actual value with which the ColorPASS

system is operating. You can check the actual value on a Conﬁguration page.

AppleTalk Default Zone

When you change the default zone for the AppleTalk protocol in Local Setup, make sure to

reboot the ColorPASS to see the effect.

Novell NetWare Cover/Banner Page

To reprint a job from the Command WorkStation when your NetWare network uses a

Cover/Banner Page, either select Remove Raster or make sure not to change any print

options that require reRIPing in the Properties dialog box. Print options that require

reRIPing display the reRIP icon ( ) next to them.

If you print a job with a NetWare banner page in an NDPS environment, the Duplex and

Sorter Mode settings speciﬁed from the printer driver may have no effect. If this occurs,

print the job without the NetWare banner page.

Network