Owner's Manual

Page 19
CMYK Simulation Profile
If you set CMYK Simulation Profile to SWOP-Coated (EFI), DIC (EFI), or Euroscale
(EFI) from the Windows 95/98 printer driver with Two-way communication enabled and
then try to override the setting from the Override Print Settings window, the pull-down
menu displays Printer’s Default, preventing you from selecting a setting. As a workaround,
click the box again, choose SWOP-Coated, DIC, or Euroscale, and override the setting.
This also applies to profiles downloaded using ColorWise Pro Tools Profile Manager for use
as simulation or output profile print options.
Profile Manager
If you try to upload a custom RGB source profile or the Apple Standard profile from the
RGB Source list, you may not be able to do so.
At the Expert Color Settings window in the Windows 95/98/Me and Windows NT 4.0
printer drivers, you can update your printer driver default settings with the current
ColorPASS defaults if Two-Way Communication is enabled. If you have only one profile
downloaded as an RGB source profile, the settings (Other) Gamma, (Other) White Point,
and (Other) Phosphors are not updated. Instead, the setting “Printer’s Default” takes effect.
As a workaround, override the settings from the Command WorkStation Properties
window or from the Fiery WebSpooler/Fiery Spooler Override Print Settings window.
Installer
Fiery WebTools are not supported on Mac OS. If you try to download the printer driver or
Fiery Link for Mac OS from the Installer WebTool using Netscape Communicator on a
Windows computer, you may not be successful. To download these files, use Microsoft
Internet Explorer.
Netscape Communicator
If you access Fiery WebSpooler from Netscape Communicator version 4.6.1, Fiery
WebSpooler freezes if you try to close the Fiery WebSpooler window while it is being
loaded.
When you access Fiery WebTools from Netscape Communicator version 4.7, if the Fiery
WebSpooler Job Log has a log of over 400 print jobs, jobs may not be correctly displayed. If
this occurs, use Internet Explorer.
Remove White PPT Background override
The Remove White PPT Background print option is available only from the Override Print
Settings window of Fiery WebSpooler. To use this option when printing from a Mac OS
computer, set Color Matching to any setting other than PostScript Color Matching.
Custom page size override
If you override the page size from a custom page to one of the standard paper sizes (for
example, Letter) in the Override Print Settings dialog box, the job may be recognized as a
custom page size job, which prevents you to specify the following options:
• Paper Source (other than Stack Bypass)
• Sorter Mode (other than Off or Collate)
• Stack Mode
• Slip Sheet
ColorWise Pro
Tools
Fiery WebTools
Fiery WebSpooler