Owner's Manual

Page 15
If File Info is displayed when jobs are being sent from more than one ColorPASS, the total
number of queued jobs and the number of those jobs that is sent by the user may not return
to “0” after all the jobs have finished printing. As a workaround, change to another tool and
change back to File Info once again.
Printing using free size paper
If you print a job by setting Paper Source to MF-Size Set at Copier, loading and specifying
free size paper from the copier, the job may be displayed as “Unknown” in the Active Job
list window.
Windows computers
If you select the “Animate windows, menus, and lists” checkbox in the Visual effects area of
the Effects tab of the Display Properties dialog box in the Windows Control Panel, you may
not be able to display Fiery Link on the Windows screen when you click the Minimize
button.
Printing to the Direct connection
When you print a job to the Direct connection, the job may be displayed for a very short
time in the Active Job list window. If printing has finished, jobs may remain displayed in
the Active Job List window as if waiting to be printed. In this case, the “Printed” message
may not appear.
Error Messages
Some messages that appear on the ColorPASS or the Command WorkStation may not be
available with Fiery Link.
Additionally, the message that appears in the Fiery Status window may not be identical to
the one displayed on the ColorPASS.
The following ColorPASS error messages may not be displayed correctly in the Fiery Link
window:
Disk full
Place printed pages face down in MF tray
Invalid print job
Adding a new ColorPASS connection
To add a new ColorPASS server from the Edit My Fiery List window, make sure that the
ColorPASS you want added is turned On. If you cannot locate it, select No in the window
and confirm that the ColorPASS is turned On and is connected to your network.
Active Job List window
The time displayed for “Printed At” may not be correct.
Support
The Support tool may not correctly display the Server Support information entered in
Server Setup via the Command WorkStation.
The Support tool may not correctly display the Server Support information depending on
the display or font settings specified on your computer.