Owner's Manual

Page 13

Print options

The following print option settings speciﬁed for the original pre-imposed PostScript or

PDF ﬁle remain in effect for printing even after the job is saved as an imposed job:

• Color Mode

• Copies

• Media Type

• Paper Source

If you specify a paper size in the Size menu that needs to be fed from the Stack Bypass tray

(for example, 12x18), the Paper Source setting automatically changes to SB (Stack Bypass).

As a workaround, set Duplex to Manual in the Sheet area.

Setting Duplex to Manual will also change the Paper Source print option to SB (Stack

Bypass), if a different option is speciﬁed for the original pre-imposed job.

The Copies setting speciﬁed for the original pre-imposed job will automatically be changed

to 1 when the job is imposed.

You can override the Copies settings from the Command WorkStation Properties window

for the post-imposed job. Note that the other print option settings are grayed out and

cannot be overridden after imposition. For a duplex override, make sure to set Duplex

before imposition.

Job error

When a job error occurs while printing an imposed job, “Cancel” will be displayed in the

Status column of the Job Log window.

Adobe PageMaker 6.52

If you specify Duplex On for a print job created with Adobe PageMaker 6.52, the job may

be printed using a Top-Bottom setting, if Orientation is set to Landscape in the Imposition

window.

Windows NT 4.0

When you impose a job printed from Windows NT 4.0 computers, if the job contains

image data only, the job may be converted into a PDF ﬁle. Therefore, the page orientation

will differ from that of the original.

Re-imposing a job

You can re-impose jobs already imposed. However, never try to change the Duplex setting

when re-imposing them.

Sheet settings

If you change the paper size in the Size pop-up menu, depending on your choice of the

template, images may be cut off on both ends of the printed page. As a workaround, specify

a smaller scaling percentage in the Scaling area.

Additionally, a paper size change in the Size pop-up menu, depending on your choice of the

template and the paper size of the original pre-imposed job, may result in the center space

between the pages on a sheet being considerably narrowed.