Owner's Manual

Page 11

Overriding print settings for jobs in the Spool area

If you override print settings for a job held in the Spool area after you have edited that job

in the Thumbnail windows, the settings may revert to the settings speciﬁed for the non-

edited original job. If you want overrides to take effect, do not to save the job in the

Thumbnail windows.

Size column in the Job Log window

If you print jobs with raster data from the Print or RIP area, the number of pages may be

displayed in the Size column of the Job Log Window.

Print Pages Command from the File menu

If you choose Print Pages from the File menu and then specify Local Printer in the Select

Printer area to print an Archive Log or Queues, only one page will be printed, even if there

is more than one page to print. As a workaround, choose the Print command from the

Window menu.

Creep Adjustment

The Creep Adjustment menu may not work properly depending on your choice of the

template or number of pages of that particular job.

Thumbnail viewing from the Spool area

If you view a job that has a ﬁle size that is less than several dozen kilobytes in the

Thumbnail A window, and if you close the window by saving without making any edits, an

application error may result. If this happens, reboot the Command WorkStation.

Jobs archived to a removable media device

If you archive jobs to a removable media device, job commands including Hold, RIP and

Hold, Print, and Print and Hold cannot be canceled.

Launching ColorWise Pro Tools

If the Command WorkStation software is uninstalled, ColorWise Pro Tools cannot be

launched.

Sheet Settings

The Size pop-up menu has several options available to specify the dimensions of the sheet.

You cannot delete the options or enter a new value manually unless otherwise you choose a

custom size.

The Size setting in the Sheet area does not change when you apply a template; therefore, the

Size setting cannot be saved when you create a custom template.

Adobe Acrobat 4.05

To use DocBuilder Pro, you must install Adobe Acrobat 4.05 from the Acrobat 4.0 for

DocBuilder Pro CD. If you have already installed a non-DocBuilder Pro version of Adobe

Acrobat 4.0 on your computer, you cannot use it to use DocBuilder Pro.

Scaling

If you enter a value greater than the default in the Scaling area, the setting speciﬁed will

have no effect on the printed job.

DocBuilder Pro