Getting Started Guide

57 Using the software for the first time
3. If you have previously configured a Windows connection to the ColorPASS, then you
are ready to use ColorWise Pro Tools. If you have not configured a connection, click
Add.
4. Enter the appropriate information for the ColorPASS.
Nickname
—Enter a name for the ColorPASS. This can be any name you wish; it does
not have to match the actual server name of the ColorPASS.
NOTE: The nickname cannot contain any of the following seven characters:
[ ] _ " ' <space> <tab>
Protocol—Choose the type of network protocol you are using from the pop-up menu.
ColorWise Pro Tools is supported only with TCP/IP, so no selection is necessary.
Server Name—Enter the IP Address (or DNS or hosts name) of the ColorPASS.
New Device—Enter the name of the device the ColorPASS is connected to: 5000.
This device name appears in the Printer Setup section of the Configuration Page.
5. When you have added all the information, click Add.