Getting Started Guide

25 Setting up PostScript printing with Windows NT 4.0 and/or Windows 2000

The necessary ﬁles are installed to your hard disk.

14. If this is the ﬁrst printer driver you are installing on the computer, you may be

prompted to install ﬁles from the Windows 2000 CD. Insert the CD-ROM, browse to the

win2000\english\i386 folder, and then click OK.

When installation is complete, the Printers window appears with an icon for the newly

installed printer. You will now need to conﬁgure the options installed on your copier.

To enable Internet Protocol Printing (IPP), see “Setting up IPP printing with

Windows 2000” on page 36.

TO CONFIGURE INSTALLABLE OPTIONS ON THE COLORPASS FROM THE POSTSCRIPT

PRINTER DRIVER FOR WINDOWS NT 4.0 AND/OR WINDOWS 2000:

NOTE: Conﬁguring installable options for Windows NT 4.0 and Windows 2000

are similar. The following procedure uses Windows NT 4.0 screen captures with

Windows 2000 differences noted.

1. Click the Start button, choose Settings, and then choose Printers.

2. Click the ColorPASS icon, and choose Properties from the File menu.

3. Click the Device Settings tab, and scroll down to Installable Options. Specify the

options installed on the ColorPASS.