Getting Started Guide

xxi System requirements
Command WorkStation
To run the Command WorkStation application from a remote workstation, you need:
• A Windows-based computer with a 200MHz Pentium processor
• Windows 95/98/Me/2000 or Windows NT 4.0 with NT Service Pack 5
• TCP/IP networking protocol installed
• A video adapter card with at least 2MB of video memory
• At least 32MB of RAM
• An 850MB (or greater) hard disk drive
•A 2 x CD-ROM drive
• A 17" monitor that supports 16-bit color at a minimum resolution of 1024 x 768
DocBuilder Pro
To run the Command WorkStation application with DocBuilder Pro, you need
• A Windows-based computer with a 333MHz Pentium processor
• Windows 95/98/Me or Windows NT 4.0 with NT Service Pack 4 or 5
• TCP/IP networking protocol installed
• A video adapter card with at least 2MB of video memory
• 64MB of RAM
• An 850MB (or greater) hard disk drive
• 90MB of available hard disk space
•A 2
x CD-ROM drive
• A 17" monitor that supports 16-bit color at a minimum resolution of 1024 x 768