imageCLASS MF8180c Software Guide

Installing Software on Your Computer
1-15
Installation
1
Step 2 Connecting the Machine to a Network
1 Connect a Category 5 rated (Cat 5) twisted-pair LAN cable to the
100Base-TX/10Base-T port on the back of the machine. Connect
the other end of the cable to a network router or a hub.
Step 3 Checking Network Settings
1 Press [Menu] ➞ or to select <6.NETWORK SETTINGS> on
the LCD ➞ press [Set].
2 Press ➞ or to select <2.VIEW IP ADDRESS> ➞ press [Set].
3 Press or to select the desired setting ➞ press [Set].
4 Press [Stop/Reset] to return to the standby display.
MENU
6.NETWORK SETTINGS
NETWORK SETTINGS
2.VIEW IP ADDRESS
VIEW IP ADDRESS
1.IP ADDRESS