Technical information

2-49

CHAPTER 2 NEW FUNCTIONS

2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001

4.5 Disassembly/Assembly

The machine has the mechanical features and operations as described herein, and may be

disassembled or assembled as shown; be sure to observe the following whenever disassem-

bling or assembling the machine:

Disconnect the power plug for safety before the work.

2. Unless otherwise noted, reverse the steps used to disassemble the machine for assembly.

3. Identify the screws by type (length, diameter) and location.

4. The screws used for the grounding wire, varistors, or the like are equipped with washers

to ensure electrical continuity. Be sure to use these screws during assembly.

5. As a rule, do not operate the machine with any of its parts removed.

Do not throw toner into fire to avoid explosion.

REF.

For the following items, refer to CLC1000 series service manual.

• Removing the hopper assembly

• Removing the hoppers

• Removing the toner level sensor

• Removing the primary charging assembly cleaning pad

• Developing assembly

• Photosensitive drum

• SALT sensor