Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
ERROR CODE
E-23
0012 The lower cam solenoid 2 is damaged, the lower cam sensor 2 is dam-
aged, or the position of the lower cam sensor light-blocking plate is faulty.
0013 Either lower cam solenoid 1 or 2 is damaged , both lower cam sen-
sors 1 and 2 are damaged, or the position of the lower cam sensor
light-blocking plate is faulty.
0014 Either or both of the upper cam solenoids are damaged, or the posi-
tion of the lower cam sensors light-blocking plate is faulty.
0015 Either the lower cam solenoid or the sensor is damaged.
E522
Cause Push bar motor (M7; rotation failure)
Description
The operation does not end within 2000 ms after the motor drive signal has
been generated.
E523
Cause Reference wall motor (M6; rotation failure)
Description
The operation does not end within 2000 ms after the motor drive signal has
been generated.
E524
Cause Multi guide motor (M5; rotation failure)
Description
The operation does not end within 2000 ms after the motor drive signal has
been generated.
E525
Cause Bin paper sensor 1 (S3, S4; auto adjustment fault)
Description
Auto adjustment of the bin paper sensor 1 (S3, S4) cannot be executed; or,
an error has occurred in the auto adjustment value.
E526
Cause Bin paper sensor 2 (S6, S7; auto adjustment)
Description
Auto adjustment of the bin paper sensor (S6, S7) cannot be executed; or, an
error has occurred in the auto adjustment value.
E530
Cause Guide bar motor (M8 rotation failure)
Description
The operation does not end within a specific time after the motor drive sig-
nal has been generated: 5000 ms if front retrieval, and 2000 ms otherwise.