Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
ERROR CODE
E-22
Sorter
E510
Cause There is no clock signal from the clock sensor (P15) of the feeding motor
for 250 ms or more.
Description
There is no clock signal from the clock sensor (P15) of the feeding motor
fopr 250 ms or more.
E516
Cause Low-speed feeding motor (M10; rotation failure)
Description
There is no clock signal from the clock sensor (P123) of the feeding motor
for 250 ms or more.
E517
Cause The locking cam home position for the buffer pass unit cannot be de
tected.
Description
0001 The upper cam solenoid 1 is damaged, the upper cam sensor 1 is
damaged, or the position of the upper cam sensor light-blocking
plate is faulty.
0002 The upper cam solenoid 2 is damaged, the upper cam sensor 2 is
damaged, or the position of the upper cam sensor light-blocking
plate is faulty.
0003 The upper cam solenoid 1 or 2 is damaged, both upper cam sensor
1 and 2 are damaged, or the position of the upper cam sensor light-
blocking plate is wrong.
0004 Either or both of the upper cam solenoids are damaged, or the posi-
tion of the upper cam sensor light-blocking plate is faulty.
0005 The upper cam solenoid or the sensor is damaged.
0006 A serial port communication sensor read attempt has failed (mis-
match in echo back).
0007 A serial port communication unit read attempt has failed (mismatch
in echo back).
0008 A serial port communication unit write attempt has failed (mis-
match in echo back).
0009 A serial port communication unit write attempt has failed (mis-
match in write execution echo back).
0011 The lower cam solenoid 1 is damaged, the lower cam sensor 1 is
damaged, or the position of the lower cam sensor light-blocking
plate is faulty.