Technical information

2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001

ERROR CODE

E-17

E077

Cause The transfer belt waste toner motor is faulty; the connection between the

moor and the DC controller PCB is faulty; or the DC controller PCB is

faulty.

Description

0001 The error detection circuit on the DC controller PCB has detected

overcurrent in the transfer belt waste toner motor drive circuit.

E100

Cause • Laser unit (faulty)

• Laser driver PCB (faulty)

• Image processor PCB (faulty)

Description

xx01 At the start of potential control, the BD signal is not detected for 1

sec or more.

xx02 The operation ON current used to obtain optimum intensity is

larger than a specific value.

E110

Cause • Laser scanner drive system (overload)

• Laser scanner motor (M4; faulty)

• DC controller PCB (faulty)

Description

The rotation speed of the motor has deviated from a specific value for 0.1

sec or more.

E194

Cause • CCD unit for pattern reading (faulty)

• PCB for pattern reading (faulty)

• DC controller PCB (faulty)

In addition, a fault in the primary charging assembly or the transfer belt

may have prevented the formation of a pattern.

Description

xx01 The center of a pattern cannot be determined.

xx02 The center position (difference) in relation to the M pattern is 61 or