Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-130
TYPE
Selects the type of test print.
PGTYPE Descriptionm
0 Image from CCD (normal copying)
1 For R&D
2 256 colors
3 256 gradations
4 17 gradations
5 Full face halftone
6 Grid
7 Image position correction control pattern
8 For R& D
9 For R&D
10 MCYK horizontal stripe
11 For R&D
12 For R&D
13 For R&D
14 Full color 17 gradations
15 For R&D
16 Not used
17 For R&D
18 For R&D
19 For R&D
20 For R&D
21 For R&D
22 For R&D
Remarks Enter the appropriate number (1 through 16) using the keypad, and press
the Start key to generate test prints. In the case of 3, 4, 5, or 6, the color
may be selected in color mode (user mode).
• Be sure to return the setting to 0 after generating the test print.
DENS-C/M/Y/K
Selects the density of each color for full face halftone for PGTYPE=5.
Settings range 0~255
Standard: 128
COLOR-C/M/Y/K
Use it to select the color to generate for each PG.
1: Generate.
0: Do not generate.
Standard value: 1
Be sure to set TYPE back to 0 when leaving test print mode.