Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-96
<P-UP-TMG (pick-up timing adjustment)>
<M> <S> <R> <P> <F>
FUNC
DISP
ADJUST
COUNTER
OPTION
TEST
0
DATA-L PUDT-L
DATA-U PUDT-U
PK-ADJ-U
0
PK-ADJ-L
0
0
0
0
0
D-SEND-U
0
D-SEND-L
0
DATA-D PUDT-D
PK-ADJ-D
0
MF-SKEW
000
D-SEND-D
P-UP-TMG
F00-400-15
PK-ADJ-U/L
Use it to execute automatic pick-up from the upper/lower cassette, thereby
obtaining the pick-up timing adjustment value.
Be sure to place A4 or LTR paper in the upper and lower cassettes before
executing the operation.
DATA-U/L/D
Use it to indicate the data obtained by ‘PK-ADJ-U/L/D’.
PUDT-U/L/D
Use it to indicate the maximum value of the data obtained by ‘PK-AJD-U/
L/D’.
D-SEND-U/L/D
Use it to write the obtained data into memory.
MF-SKEW
Use it to execute skew removing operation twice when pick-up is from the
multifeeder tray (effective only when the paper type is set to ‘thickest’).
0: Remove skew by registration roller
1: Remove skew by registration roller and feeding roller
Settings Use it if thick paper tends to move askew.
PK-ADJ-D
Use it to start automatic pick-up from the paper deck and to obtain the pick-
up timing adjustment value.
This mode is an adjustment mode for LTR paper. As such, be sure to de-
posit LTR paper in the paper deck in advance.
Settings Use the mode if a discrepancy is noted along the leading edges of LTR
copies.