Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-89
F00-400-10
■ Entering Backup Data
If you have executed ‘RAM-CLR’ for the DC controller PCB, use this screen to enter the
data recorded on the service label.
P-TH-1/2
Enters the output characteristics of the paper thickness sensor set at time of
shipment from the factory.
SNSR-RNK
Enters the characteristics of the paper thickness sensor to be installed
newly.
Remarks The values A through E change by toggle operation.
C/Y/K-OFST
Use it to enter the offset value for the image position correction pattern.
Do not enter any values other than those on the service data sheet.
POTOFSTC/M/Y/K
Use it to enter the offset value for the potential sensor.
<M> <S> <R> <P> <F>
FUNC
DISP
ADJUST
COUNTER
OPTION
TEST
DC-CON READY5/5
A
SNSR-RNK
XXXX
P-TH-2
XXXX
P-TH-1
X
Y-OFST
X
C-OFST
XX
POTOFSTM
XX
POTOFSTC
X
K-OFST
XX
POTOFSTY
XX
POTOFSTK