Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-85
<DC-CON (DC controller PCB-related adjustment)>
<M> <S> <R> <P> <F>
DISP
ADJUST
COUNTER
FUNC
DCCON
xxxx
OPTION
TEST
RAM-CLRCHK-SUM
DC-CON READY
1/5
F00-400-06
RAM-CLR
Clears the all data of RAM on the DC controller PCB and sets the standard
value.
Remarks The contents of the RAM will not be replaced with the initial settings until
the CPU on the DC controller PCB is powered, requiring you to turn off the
power switch and disconnect and then connect the power plug after execut-
ing ‘RAM-CLR’.
CHK-SUM
Starts a check of the ROM on the DC controller PCB, i.e., totals the data in
RAM.
DCCON
Indicates the check sum value of DIMM ROM on the DC controller PCB.
Remarks Indicates only when ‘CHK-SUM’ is executed.