Technical information

ManualsBrandsCanon ManualsAll in One PrinterCLC5000

611

612

613

614

615

616

617

618

619

620

2001 CANON INC.

2000 2000 2000 2000

CANON CLC5000 REV.0 JAN. 2001

SERVICE MODE

S-23

Address Connector Description Remarks

80000F 0 PS12 transfer belt lifter sensor 1 UP:01

1 PS13 transfer belt lifter sensor 2 DOWN:10

2 PS17 transfer belt front end sensor 1 detected: 0

3 PS18 transfer belt rear end sensor 2 detected: 0

4 PS19 transfer belt front end sensor 3 detected: 1

5 PS20 transfer belt rear end sensor 4 detected: 1

6 – not used –

7 PS10 transfer belt cleaning web rotation sensor repeat 1 and 0 as

rotating

800010 0 M35 registration motor pulse count count end: 1

1 M13 transfer belt swing motor pulse count count end: 1

2 M23 duplex paper guide motor pulse count count end: 1

3 – not used –

4 – for factory adjustment –

5 – for factory adjustment –

6 – image position correction CCD shutter (front) open: 1

7 – image position correction CCD shutter (rear) open: 1

800011 0 – for factory adjustment 00;GDD

1 – for factory adjustment 01;GDE

2 – not used –

3 – not used –

4 – not used –

5 – not used –

6 – not used –

7 – not used –

802000 0 – CPU leading edge signal ON:1

1 – for factory adjustment –

2 – for factory adjustment –

3 – for factory adjustment –

4 – auto shut-off ON:1

5 – external PCB rest rest: 0

6 – 24 VDC remote ON:1

7 – phsync enable enable: 1

802001 0 – for factory adjustment –

1 – for factory adjustment –

2 – for factory adjustment –

3 – for factory adjustment –

4 – all-night power supply switch

after power SW-ON: 1

5 TH12 environment sensor low humidity: 0

6 – buffer unit power supply remote ON;G0

7 – flicker PCB control signal ON;G0