Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-18
<SHD/BOF (shading/black offset data)>
<M> <S> <R> <P> <F>
READY READY
ADJUST
COUNTER
OPTION
TEST
SHD/BOF
FUNC
DISP
xxx
xxxxxxxxxxxxxxx
BOARD-BBAR-CODE
TARGET-B
BOF-B
xx xxxx xx
xxx
xxx
BOARD-G
TARGET-G
BOF-G
xx xx
xxx
xxx
BOARD-R
TARGET-R
BOF-R
F00-200-10
BAR-CODE
Indicates the bar code value of the standard white plate.
Remarks The value is indicated only after executing
‘FUNC > CCD > AUTO > ADJ’. (Thereafter, the value will not be indi-
cated at power on/off.)
BOARD-B/G/R
Indicates the output of each CCD when the standard white plate is read.
(output value after A/D conversion)
Remarks Initial value: 211
TARGET-B/G/R
Indicates the shading target value.
Remarks Initial value: 233
BOF-B/G/R
Indicates the output of each CCD when the scanning lamp is off. (odd bit/
even bit)