Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-4
1.5 Basic Operations
Selecting Items
• Items may be Level 1, Level 2, or Level 3. The Level 1 items remain on the screen
throughout service mode.
• To select an item, press the highlighted notation on the touch panel.
• Display (e.g., ADJUST>ADJ-XY>MRK-MB)
<M> <S> <R> <P> <F>
DISP
ED-MODE
FUNC
COUNTER
OPTION
TEST
x
EDADJ-X
xxxx
xxx
xxx
xxx
LOOP-MB
EDADJ-Y
xxx
ADJ-XY READY READY
1/2
ADJUST
OK
+
LOOP-TH
MAK-MB
xxx
MAK-MB
Indicates the state of the printer unit.
Indicates the selected Level 2 item.
Switches among screens if
multiple screens exist for
the selected Level 3 item.
Level 1 items:
Indicated at all times. The
current mode is indicated
normally and the rest is
highlighted.
Level 3 items:
Data display items are indicated
normally. Selection by touching
will not highlight any items.
READY:
SERVICE:
WAITING:
COPYING:
ERROR:
DOOR:
JAM:
Ready to accept a command
for copying operation.
Executing service mode; not
ready to accept a command
for copying operation.
Executing an operation
(initial rotation, etc.).
Executing copying operation
Service error.
Cover open.
Paper jam.
Level 2 items:
Value input items are highlighted. Selecting (by touching) an
item causes the item to be indicated normally, ready to accept
an input.
Stores the entered value. The
value returns to the previous
value unless OK is pressed.
Switches
between+and-.
Increases the
current input
when entering a
numeric value.
<TEMP-X>
xxx
xxx mm
<ED-X>
xxx
xxx mm
<TEMP-Y>
xxx
xxx mm
<ED-Y>
xxx
xxx mm
Indicates the state of the reader unit.
Indentifies the current screen if multiple screens
exist for the selected item.
READY:
BUSY:
Ready to accept a command for
copying operation.
Executing service mode; not ready to
accept a command for copying
operation.
F00-105-01
■ Keys on the Control Panel
0 to 9 Press an appropriate number (0 through 9) when entering a value.
Reset Press it to end service mode (not valid for LCD-CHECK or KEY-CHECK).
Clear Press it to return any input to 0.
Stop Press it to stop various operations.
Start Press it to start copying operation.