Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
5-130
4.1.23 E075
• Check the detail code of ‘E075’ using ‘DISPLAY > JAM/ERR’ in service mode.
a.E075–0001, 0002, 0003, 0004
Transfer belt edge sensor (PS17, PS18, PS19, PS20)
1) Is the sensor represented by the detail code in question normal?
(See the instructions on how to check photointerrupters.)
NO: Check the operation; if normal; replace the sensor.
Transfer belt unit (connector)
2) Is the connector of the transfer belt unit connected securely?
NO: Connect it securely.
Slave roller (fixing screw)
3) Is the fixing screw of the slave roller assembly loose?
When the slave roller assembly [1] is bent, the fixing screw [2] at
the rear is loosened; be sure to tighten the fixing screw after the
work. Otherwise, the slave roller assembly will wobble, causing the
transfer belt to become displaced (leading to ‘E075’).
NO: Tighten it fully.
F05-401-04
[1]
[2]