Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
5-56
The settings on the screens of service mode are cleared when the RAM on the
reader controller PCB is initialized.
ADJUST Settings on ADJ-XY screen
Settings on DOC-REC screen
Settings on PROJ screen
Settings on ED/RF screen
Settings on COL-ADJ screen
Settings on ADJ-MISC screen
Settings on PRJ-ADJ screen
OPTION Settings on P-OPT screen
Settings on ON-SET on P-OPT screen
Settings on REMOTE screen
Settings on DECK screen
The settings on the screens of service mode are cleared when the RAM on the
DC controller PCB is initialized.
ADJUST Settings on PASCAL screen
Settings on FEED-ADJ screen
Settings on ENV-SET screen
Settings on HV-TR C/M/Y/K screen
Settings on HV-SP screen
Settings on HV-FS screen
Settings on HV-EL screen
FUNC Settings on DC-CON screen
Settings on P-UP-TMG screen
Settings on P-THICK screen
Settings on IMG-REG screen
Settings on FUSER screen
OPTION Settings on P-OPT screen (except ON-SET)
Service Mode Settings Related to the DC Controller PCB
ADJUST Settings on PASCAL screen
Settings on FEED-ADJ screen
Settings on ENV-SET screen
Settings on HV-TR C/M/Y/K screen
Settings on HV-SP screen
Settings on HV-FS screen
Settings on HV-EL screen
FUNC Settings on DC-CON screen
Settings on P-UP-TMG screen
Settings on P-THICK screen
Settings on IMG-REG screen
Settings on FUSER screen
OPTION Settings on P-OPT screen (except ON-SET)