Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
5-30
2.5.4 When Supplying the Hopper with Toner
Perform the following steps when supply-
ing a new hopper or the existing hopper
with little toner (after replacing the toner
level sensor, for example) with toner so as
to prevent leakage of toner from the hopper:
1) Install the hopper position metal fixings
(left, right) to the copier.
2) Fix the hopper assembly to the hopper
position metal fixings.
3) Push the shutters at the bottom of the
hopper in the direction of the arrow,
making sure that the shutters are se-
curely closed.
F05-205-08
4) Start supplying toner to the hopper.
5) After a minimum of 5 min, lower the
hopper.
[1]