Technical information

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
5-23
2.4 Charging Assembly-Related Parts
2.4.1 Adjusting the Height of the Charging Wire
[1]
[2]
Charging assembly
Primary charging
assembly
Separation charging
assembly
Pre-fixing charging
assembly
Height of charging wire (mm)
10.5±0.2
16.5±0.3
Variable width
4 mm (approx.)
4 mm (approx.)
4 mm (approx.)
T05-204-01
REF.
The height (position) of the charging wire may be adjusted by turning the
screw found behind the corona assembly. (The height of the charging wire for
the primary charging assembly, however, cannot be adjusted.) A full turn of
the screw changes the position of the charging wire by about 0. 7 mm.
2.3.3 Points to Note When Fitting the Drum Drive Belt
Fit the drum drive belt [2] so that all the
markings [1] on the drum drive pulleys face
the same direction.
F05-203-05
17±
0.2